Here is the Setup Guide for the Keysmart, to simplify the commissioning of your device. 

Follow it to digitise your workshop in less than ten minutes and take full advantage of its advanced features for efficient production management. 

1. Verify your network stream configuration (see the dedicated page : Configuration of the network streams
   1. You can use our internal tool to test it (PC or Mac)
2. Connect to the device via Ethernet at http://10.10.10.1
3. Configure your Wi-Fi by clicking on the Wi-fi icon
4. Assign your Keysmart to your machine from your Keyprod platform 
5. Configure the inputs of your Keysmart 
6. Check the result of your settings and confirm that your machine status is correctly reported on the timeline.